Suitable for Restaurants, Bars, Pub Cellars, walk-in coolers, fast-food outlets, stadiums and theatres.
Wall-mounted CO2 Detector
If you are using CO2 to carbonate your beverages on site you will need a CO2 safety monitor to alert those in the area of a potential leak. A CO2 detection system with audible and visible alarms will satisfy your local fire code regulations and workplace safety legislation including EH40 in Europe.
The Ax60+ Bundle contains a Central Display Unit, one CO2 Sensor one Blue Alarm Strobe and a Sensor Protector kit, everything you need to protect your facility from dangerous CO2 gas leaks.
The Central Display Unit displays gas levels and can be programmed by the user to alarm and sound at customizable set-points specific to their requirements.
The system also displays a Time Weighted Average (TWA) level, monitoring an 8 hour period.
This Ax60+ Bundle comes with one CO2 sensor, but you can attach up to four of any combination of CO2 or O2 (other three sensors sold separately).
We recommend that you:
- always carry out a full risk assessment for your specific facility
- have one Sensor per 80m³ area
- install one Alarm Unit per sensor, unless able to install another Alarm on the wall outside the room where the risk is to pre-warn of a leak
- the Central Display Unit should be installed away from the risk area in a managers office, or operation room.
The Ax60+ is recommended for commercial areas including bars, cellars, walk-in coolers, pubs, restaurants, fast-food outlets, stadiums and theatres.
We recommend you place warning signs alongside the CO2 sensor, Alarm and the Central Display Unit, you can download and print these here.
Datasheet for Ax60+
Service Manual for Ax60+